# Pipeline failure **URL:** \ **Category:** Pipeline Failure\ **Tags:** Extract-Data, Ask-AI, Gmail-Reader, Google-Sheets-Writer\ **Created:** [February 24, 2025, 8:37pm UTC](https://forum.gumloop.com/t/pipeline-failure/1413 "2025-02-24T20:37:52Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![BenDavies](https://avatars.discourse-cdn.com/v4/letter/b/76d3ee/32.png) [@BenDavies](https://forum.gumloop.com/u/BenDavies)\ **Post date:** [February 24, 2025, 8:37pm UTC](https://forum.gumloop.com/t/pipeline-failure/1413/1 "2025-02-24T20:37:52Z")
I got a failure and I’m not sure why. Here is the run ID: kgcJJUP3GMUh5fFim6UzCv Also: [https://www.gumloop.com/pipeline?workbook\_id=tBG7hDAM87zJ3jpaupWKkK&run\_id=kgcJJUP3GMUh5fFim6UzCv](https://www.gumloop.com/pipeline?workbook_id=tBG7hDAM87zJ3jpaupWKkK&run_id=kgcJJUP3GMUh5fFim6UzCv) ---
**Author:** ![Wasay-Gumloop](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.gumloop.com/wasay-gumloop/32/69_2.png) [@Wasay-Gumloop](https://forum.gumloop.com/u/Wasay-Gumloop)\ **Post date:** [February 25, 2025, 12:42am UTC](https://forum.gumloop.com/t/pipeline-failure/1413/2 "2025-02-25T00:42:50Z")
> [@BenDavies](#): > > kgcJJUP3GMUh5fFim6UzCv Hey @BenDavies - I’ve requested access to view the flow. You can also enable ‘anyone with the link can view’ under the share button. From the logs, I can see that the rate-limit was reached for GPT-4o on your account. Seems like you’re using your own API key here hence the rate-limits as per your account tier are followed. ---
**Author:** ![BenDavies](https://avatars.discourse-cdn.com/v4/letter/b/76d3ee/32.png) [@BenDavies](https://forum.gumloop.com/u/BenDavies)\ **Post date:** [February 25, 2025, 4:49am UTC](https://forum.gumloop.com/t/pipeline-failure/1413/3 "2025-02-25T04:49:27Z")
Ok that has now been added. I’ve switched to Sonnet 3.5 for all nodes. THe main issue with it is the extracting of email addresses and names. Originally Ask AI was reading email bodies to try and get that information but I’ve added sender\_addresses and sender\_display\_names output from Gmail reader. It also needed a "combine lists to make that work. Now th issue is the output is doubling from 160 (requested in Gmail reader) to 320 becasue of combin lists. I tried adding a trimmer but same error. Bit of a mess at the moment. Would be happy for you to take a look. ---
**Author:** ![Wasay-Gumloop](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.gumloop.com/wasay-gumloop/32/69_2.png) [@Wasay-Gumloop](https://forum.gumloop.com/u/Wasay-Gumloop)\ **Post date:** [February 25, 2025, 7:39am UTC](https://forum.gumloop.com/t/pipeline-failure/1413/4 "2025-02-25T07:39:01Z")
I see. I still don’t seem to have access, can you refresh the workbook, click on the share button and add my email ([wasay@gumloop.com](mailto:wasay@gumloop.com)) or set it to ‘anyone with the link can view’ please? ![image](https://canada1.discourse-cdn.com/flex027/uploads/gumloop/original/1X/10f347a006c93b15f601badb27eaf7f6e69a8f39.png) ---
**Author:** ![BenDavies](https://avatars.discourse-cdn.com/v4/letter/b/76d3ee/32.png) [@BenDavies](https://forum.gumloop.com/u/BenDavies)\ **Post date:** [February 26, 2025, 11:07pm UTC](https://forum.gumloop.com/t/pipeline-failure/1413/5 "2025-02-26T23:07:34Z")
My apologies for the delayed response. Access should be good now. Again the main issue is fetching the correct sender\_address and sender\_display\_names The rest seems to be working well ---
**Author:** ![Wasay-Gumloop](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.gumloop.com/wasay-gumloop/32/69_2.png) [@Wasay-Gumloop](https://forum.gumloop.com/u/Wasay-Gumloop)\ **Post date:** [February 27, 2025, 12:08pm UTC](https://forum.gumloop.com/t/pipeline-failure/1413/6 "2025-02-27T12:08:47Z")
Hey @BenDavies - I still don’t seem to have access, apologies for the back-and-forth but can you confirm if you’ve set the share access to ‘anyone with the link can view’ or my email on this flow: [https://www.gumloop.com/pipeline?workbook\_id=tBG7hDAM87zJ3jpaupWKkK&run\_id=kgcJJUP3GMUh5fFim6UzCv](https://www.gumloop.com/pipeline?workbook_id=tBG7hDAM87zJ3jpaupWKkK&run_id=kgcJJUP3GMUh5fFim6UzCv) ![image](https://canada1.discourse-cdn.com/flex027/uploads/gumloop/original/1X/10f347a006c93b15f601badb27eaf7f6e69a8f39.png) ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex027/uploads/gumloop/original/1X/d02ff8efcde6ac5d3ac8aa0376137d5f804da549.png) [@system](https://forum.gumloop.com/u/system)\ **Post date:** [February 28, 2025, 8:38am UTC](https://forum.gumloop.com/t/pipeline-failure/1413/7 "2025-02-28T08:38:37Z")
This topic was automatically closed after 3 days. New replies are no longer allowed.